You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Restringing blackout blinds - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Interior Things (https://newellgurus.com/forumdisplay.php?fid=6)
+--- Thread: Restringing blackout blinds (/showthread.php?tid=1206)



Restringing blackout blinds - les korcala - 01-17-2014

Hello,
I have blackout blinds in our bedroom and one of them string broke and I need to restring it. Its in 2001 Newell with two slides ( its the non slide side in rear bedroom )
Was wonder if anyone did them self. If so, how did you remove the top part of the blind bracket? is screw to the plywood bracket?

I have hard time locating screws where the molding holding in place !
I included couple of photos.


RE: Restringing blackout blinds - folivier - 01-17-2014

You may need to remove the surround panel in your first photo. There should be 2 or 3 screws in the black carpet on the sides. The panel should just come out then you can access the head rail. The blinds should have a screw to remove them from the head rail. You can buy more cord at a blind shop locally or on Amazon. Cindy just redid 1 but I was doing other stuff and didn't watch. I'll try and get some info from her. In the meantime a spring clamp works to keep the blind up Smile


RE: Restringing blackout blinds - les korcala - 01-20-2014

Thanks,
I noticed some screws on each side of the cabinets, they are not exactly lined up with molding but could be right screws for the panel to remove it..

I went to several blind/window outlets as well as home Depot but no ones has super small diameter of the rope they use in Newell blinds, its very small , it could be the reason of the diameter why breaks down over the time.
My broke right where turns 90 degree in to small pilot hole, just got fried.


RE: Restringing blackout blinds - folivier - 01-20-2014

I found some on ebay. It was 0.9mm, if you have the same blinds as mine which are Vista Products.
http://www.ebay.com/itm/271152117070?var=570141505699&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Cindy has a file with more info on re-stringing. I'll post it in the interior section in the docs area in a few minutes.


RE: Restringing blackout blinds - les korcala - 01-20-2014

Thank you so much!
I took the side panel out from left tv cabinet , but only has bunch of extra electric wires bunched up , nothing to do with the over the blinds panel?
Other site of the window in our coach has 3 shelf and I looked to the side of it , carpet side wall has some screws but facing wrong direction.


RE: Restringing blackout blinds - ccjohnson - 01-20-2014

Try a call to Newell.