Rattle behind Drivers window - Printable Version
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Interior Things (https://newellgurus.com/forumdisplay.php?fid=6)
+--- Thread: Rattle behind Drivers window (/showthread.php?tid=1233)
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Interior Things (https://newellgurus.com/forumdisplay.php?fid=6)
+--- Thread: Rattle behind Drivers window (/showthread.php?tid=1233)
Pages:
1
2
RE: Rattle behind Drivers window - ccjohnson - 01-29-2014
Don't forget the hammer option!!
RE: Rattle behind Drivers window - folivier - 01-29-2014
You could squirt a little caulk in the hole.
Bill did you remove the speaker valence? That might be the best place to drill a hole.
RE: Rattle behind Drivers window - bikestuff - 01-29-2014
I agree that is the spot I was eyeing for drilling the hole. There is an inch or two that would be above the rattle yet would be covered by the valence.