HWH slide room material - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Documentation (https://newellgurus.com/forumdisplay.php?fid=13)
+--- Forum: Slides (https://newellgurus.com/forumdisplay.php?fid=72)
+--- Thread: HWH slide room material (/showthread.php?tid=1342)

---

HWH slide room material - rheavn - 03-20-2014

Here are three HWH manuals that will assist in understanding, troubleshooting and fixing problems with HWH hydraulic slides. A synchronizing cylinder is used with the two cylinder salon slides. The bedroom slide is a one cylinder mechanism.

Hope this is helpful........................

http://www.hwhcorp.com/ml37955.pdf

http://www.hwhcorp.com/ml37939.pdf

http://www.hwhcorp.com/ml21958.pdf

---

RE: HWH slide room material - qcj - 03-20-2014

That's great stuff Steve. You are a jewel shinning in the dark. I made a copy of all of it.

---

RE: HWH slide room material - encantotom - 03-20-2014

steve, i think it is only fair for you to come apply your knowledge to help me fix my slide.

tom

---

RE: HWH slide room material - rheavn - 03-20-2014

Your slide problem has led to me trying to educate myself, but the education is ongoing. My knowledge is limited. I did think of you when I found the material. I thought the last few pages of the synchronizing manual may have some application to your problem.

---

RE: HWH slide room material - encantotom - 03-20-2014

so does that mean you are coming over?

tom

---

RE: HWH slide room material - rheavn - 03-20-2014

Tom,
Take a look at Part 6 on page 7 of the troubleshooting guide as I think this addresses your slide issue. Looks like the check valve may be the culprit.

"so does that mean you are coming over?"

I think there was a misunderstanding. I thought it would be nice if you were closer so we could help each other. Apparently you thought closer meant moving closer to your daughter as you are now 50 miles further away. See you in June.

---

RE: HWH slide room material - Richard - 03-21-2014

Thanks Steve. Looks like we may have a hands on slide workshop at the rally. If it's not broke then take it apart and find out why.

---

RE: HWH slide room material - rheavn - 03-21-2014

Count me in! I think this was the material you were looking for.

---

RE: HWH slide room material - lbrachfe - 03-21-2014

Richard you are a scream, but I would be real happy to join in on " a hands on slide workshop".... It's fun taking other peoples stuff apart , lot's of fun !!!

---

RE: HWH slide room material - folivier - 03-21-2014

Want me to bring my sawzall? Just in case?

---