Torque Multiplier for lug nuts - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Suspension/Tires/Wheels (https://newellgurus.com/forumdisplay.php?fid=5)
+--- Thread: Torque Multiplier for lug nuts (/showthread.php?tid=2441)

---

Torque Multiplier for lug nuts - Mxfarm - 08-01-2015

Anyone ever use one of these? 

http://www.ebay.com/itm/391070868230

4800 nm is just over 3540 ft lbs....

Marc

---

RE: Torque Multiplier for lug nuts - Retro - 08-01-2015

I have a 12x very similar, I wouldnt want to be without it. I carry a 1/2" drive torque wrench also. They work very well but i would watch the quality of the cheaper ones

---

RE: Torque Multiplier for lug nuts - kyleb - 01-17-2016

http://www.ebay.com/itm/2015-Multiplier-Torque-Set-Saving-Wrench-Lug-Nut-Lugnuts-Remover-Labor-Tire-Tool-/161858029809?hash=item25af7d88f1:g:QAIAAOSwNNxWFEoi&item=161858029809&vxp=mtr

Looks like the same thing for less.
I have a similar unit - no complaints. Have used it on some seriously tight & rusty nuts. Have wrung off studs with it. Seems to be holding up well.
--I haven't needed it on my Newell, but it sure was handy to have when I was working in my 1955 Scenicruiser that had rusty wheel nuts from being parked outside for over 20 years.

---