740 toggle switch - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Drivetrain (https://newellgurus.com/forumdisplay.php?fid=4)
+--- Thread: 740 toggle switch (/showthread.php?tid=2833)

---

740 toggle switch - jcus - 04-29-2016

I have a toggle switch [spring loaded to center] next to my trans check light. When I move it to either position, the gear selected window goes blank for a couple of seconds, but nothing else happens. I assume this is for reading trans codes or levels.
Does anyone with a series 60 with the ht740 know what it does or how it works? Tech support at Newell says its a transmission overide in case of fault, maybe, maybe not.
Thanks, Jim

---