AquaHot Exhaust Blowout - Printable Version
+- Newell Gurus (
https://newellgurus.com)
+-- Forum: Technical Discussions (
https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Heating Systems (
https://newellgurus.com/forumdisplay.php?fid=11)
+--- Thread: AquaHot Exhaust Blowout (
/showthread.php?tid=327)
RE: AquaHot Exhaust Blowout -
Richard - 11-09-2012
Miller 135. With spool gun and cart
Will outfit with gas for SS and aluminum
I couldn't justify the all in one mig tig arc units. And I think Steve's approach is probably the better to have separate boxes for mig and tig/arc.
Laughing at yet another examples of how the gear heads all tend to gravitate to the same stuff.
RE: AquaHot Exhaust Blowout -
smagown - 11-10-2012
Millermatic 200 Mig 220v
Airco AC stick 220v
Victor cutting rig
RE: AquaHot Exhaust Blowout -
prairieschooner - 11-10-2012
Agreed. The 135 does a good job with sheet metal, uses a standard 120 volt outlet but is limited to the thickness of the metal. My Thermal Arc is made by Miller and is the smaller Inverter type that is 120/240 and will burn 1/8" Rod at the higher voltage.