You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Jake Brake - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: General and or Other Stuff (https://newellgurus.com/forumdisplay.php?fid=16)
+--- Forum: General (https://newellgurus.com/forumdisplay.php?fid=21)
+--- Thread: Jake Brake (/showthread.php?tid=3284)



Jake Brake - rcantrell52 - 01-01-2017

All,
How quickly should it take for the Jake Brake to engage after removing foot from the accelerator? Test drove an 07 and liked the ride, drive, and handling. Did not have to make in any steering adjustments. This was a pleasure to drive. The Jake Brake was turned on and set to high, but it seemed that it took several seconds before it would engage. Is this normal? I had to use the regular brakes to slow down. Thanks for any and all input.

Reese


RE: Jake Brake - jcus - 01-01-2017

(01-01-2017, 04:12 PM)rcantrell52 Wrote:  All,
How quickly should it take for the Jake Brake to engage after removing foot from the accelerator? Test drove an 07 and liked the ride, drive, and handling. Did not have to make in any steering adjustments. This was a pleasure to drive. The Jake Brake was turned on and set to high, but it seemed that it took several seconds before it would engage. Is this normal? I had to use the regular brakes to slow down. Thanks for any and all input.

Reese

Mine engages immediately but I feel very little effect at low rpm. As engine shifts down and rpm rises,
you will feel [and especially in my coach with a resonator], hear it. But I have very little braking effect at 
low engine rpm.  My jake will slow me down in town a bit, but always have to use the regular brakes.
Jim


RE: Jake Brake - rcantrell52 - 01-01-2017

Jim,
Thanks for your reply. Low rpms is probably what was happening during the drive. The drive was on a loop with speed limit of 65 and traffic. I was more concern with traffic and how the Newell drove then with the rpm's.

Reese


RE: Jake Brake - jcus - 01-01-2017

(01-01-2017, 06:10 PM)rcantrell52 Wrote:  Jim,
Thanks for your reply. Low rpms is probably what was happening during the drive. The drive was on a loop with speed limit of 65 and traffic. I was more concern with traffic and how the Newell drove then with the rpm's.

Reese

I am thinking the 10 speed shifts at fairly low rpm. Your biggest benefit will be maintaining a speed
coming down a hill. You normally shift down to a gear where your desired speed is meet, and rpm is 
+1500. Here the jake should hold you with only occasional use of your service brakes.


RE: Jake Brake - Pardue101 - 01-01-2017

What engine does it have.
That will make a difference


RE: Jake Brake - jcus - 01-01-2017

(01-01-2017, 08:34 PM)Pardue101 Wrote:  What engine does it have.
That will make a difference

Michael would know for sure, but will guess a C-15 with a 10 speed.


RE: Jake Brake - Pardue101 - 01-01-2017

A Cat can be set up that way.
If that is a concern get it to a Cat dealer and let them look to see how it is programmed.
I had a Cat that the jakes did not start till you taped the brakes.


RE: Jake Brake - rcantrell52 - 01-02-2017

Julius and Jim,
This 07 Newell had the CAT 625 BHP with the 12 speed transmission. At 60 mph the transmission was in 12th gear. The transmission starts in 3rd gear. Thanks for your comments.

Reese


RE: Jake Brake - rcantrell52 - 01-02-2017

Julius and Jim,
Went to the dealer website and looked again at the ad. The dealer states that the engine is a CAT C-15 with 625 BHP. Also, the ad shows the ZF Astronomic 10 speed transmission. On the panel it showed 12. Thanks

Reese