You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Docking light rubber cover - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Exterior (https://newellgurus.com/forumdisplay.php?fid=7)
+--- Thread: Docking light rubber cover (/showthread.php?tid=3403)



Docking light rubber cover - Richard - 03-24-2017

On my coach, it appears I have 4 1/4  diameter landing lights for docking lights. They are held in a white rubbery waterproof cover. As I was trying to remove a burned out light from the rubber cover, it ripped. Tons of replacement bulbs available, but the rubber boot is really what I need. 

Do any of you have a source, or even know what this cover would be called?

If not, OK. I'll try to use standard grommet mounts.


RE: Docking light rubber cover - ccjohnson - 03-24-2017

Richard, try to find a stop light / tail light led style complete with rubber mount from a trailer supply store or parts house. They may only be available in black. Some good sized high end truck stops may also have them.


RE: Docking light rubber cover - HoosierDaddy - 03-25-2017

If you have to use the black grommet here is a way to take it up a notch!

http://www.ebay.com/itm/Chrome-Plastic-Bezel-for-Grommet-Mounted-Light-4-without-Visor-UPI-10484-/112321951633?hash=item1a26e8f791:g:bgcAAOSw32lYuLlq


RE: Docking light rubber cover - Richard - 03-25-2017

Clint,

I found a white LED trucklight that I am using for a replacement. It is "sealed", so I may be able to get by with the grommet. The protective boot was a good idea, since the light gets a shower every time you drive in rain.


RE: Docking light rubber cover - Richard - 03-27-2017

Hmmmm, it's official name is closed back grommet cover. No wonder none of the terms I used resulted in a google hit.

https://www.amazon.com/Grote-91950-Closed-Grommet-Lights/dp/B000CCDG3Y


RE: Docking light rubber cover - Shamu406 - 11-19-2019

Richard,
I'm trying to fix my burned out landing light. I have it out, but I am not sure if I can simply remove the light from the rubber boot, to replace a bulb or do I need a new light? I'm apprehensive about trying to remove the light from the boot, as I don't want to rip it. Do I need just a bulb, or a new light? Thanks!


RE: Docking light rubber cover - Richard - 11-19-2019

Well......

You have to take the bulb out of the grommet to replace the bulb light. If it doesn’t rip, you only need a bulb.

If it rips, then you will have to source a replacement light assembly.

I don’t know what else to say. I used a white LED light from a truck supply. Looks good, but not nearly as effective as the landing lights used originally.


RE: Docking light rubber cover - Shamu406 - 11-19-2019

Thanks Richard,
I"ll try to heat it up the boot to get the light out. Then try to match the light beam?
I called Newell, they have the light/boot assembly for 156.99
But like you, I like to save money if possible and source it myself!
Thanks again Brother!


RE: Docking light rubber cover - Shamu406 - 11-19-2019

Problem solved!
I was able to remove the rubber boot from around the landing light without tearing it! Then to my surprise, the bulb was exactly the same front running light bulb as on my Harley Fatboy, of which I just happen to have a bag full of them! So, luckily, I did not have to order one from Newell for 156.00. This one was a rare "no cost" repair. I like that. Thanks again, for the heads up Richard!