You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Alignment time - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Repair Maintain and Inspect (https://newellgurus.com/forumdisplay.php?fid=19)
+--- Forum: General Repair (https://newellgurus.com/forumdisplay.php?fid=23)
+--- Thread: Alignment time (/showthread.php?tid=3494)

Pages: 1 2


RE: Alignment time - Fulltiming - 02-17-2018

It was common for Newell to build one or two models with a new feature, then continue to build units without the feature while Newell tested it out. If all went smoothly, their new feature would be incorporated into some or all units after a number of months. That is one reason you can never assume that a specific coach had a certain feature based on the year model or the coach number.


RE: Alignment time - WSallai - 02-18-2018

(02-17-2018, 03:18 PM)1996 Newell Coach #416Fulltiming Wrote:  Bill, congratulations. To the best of my knowledge you have the first or at most, the second Newell built with IFS. I think I was able to confirm that #414 does have the Ridewell Solid front axle. Still don't have a definitive word on #415.

Thanks!  As best as I can tell, my Coach was built in 1995 and was used for the FMCA Show that year.  See attached plan drawing.

https://photos.app.goo.gl/my2IwR1lXh1Uel9r2


RE: Alignment time - Fulltiming - 02-19-2018

You are correct Bill. Thanks for posting the plan drawing. Very interesting.