You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Waste Tank Sending Unit replacement - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Repair Maintain and Inspect (https://newellgurus.com/forumdisplay.php?fid=19)
+--- Forum: General Repair (https://newellgurus.com/forumdisplay.php?fid=23)
+--- Thread: Waste Tank Sending Unit replacement (/showthread.php?tid=3597)



Waste Tank Sending Unit replacement - rwatts7777 - 06-30-2017

Hi,
Silverleaf shows waste tank is 100% full even after emptying.
Have flushed mx times. even with enzymes.
Have cleaned contacts on, what appears to be a "telephone" line at sending unit.
Have swapped "black" tank connection with "fresh"... then shows "fresh" at 100% full.
I assume I have a bad sending unit from the waste tank.
Was advised to tip coach to curb side before attempting replacement.
Any other helpful suggestions other than haz mat suit??
Any other tests to do before I replace?
Thanks.
Richard


RE: Waste Tank Sending Unit replacement - Richard - 06-30-2017

Are you talking about replacing a sensor that penetrates the tank wall or a sliver leaf box that is wired to the sensors and the display panel?


RE: Waste Tank Sending Unit replacement - rwatts7777 - 06-30-2017

The sensor that penetrates waste tank. The silver leaf box appears to be fine.


RE: Waste Tank Sending Unit replacement - Richard - 06-30-2017

https://russontheroad.wordpress.com/user-reports/malfunctioning-rv-holding-tank-sensor-probes-and-potential-fixes

Might want to read this