How can I replace my slide seals? - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: General and or Other Stuff (https://newellgurus.com/forumdisplay.php?fid=16)
+--- Forum: General (https://newellgurus.com/forumdisplay.php?fid=21)
+--- Thread: How can I replace my slide seals? (/showthread.php?tid=3619)

---

How can I replace my slide seals? - Newell 381 - 07-20-2017

Hey everybody, my salon slide seal finally gave out and I would like to know if anybody has a write-up on how to extend the slides so the seals can be accessed. My dad and I both own 1998 Newells with slide outs and he was going to have our fabrication shop make a rolling carriage to support the slide when its over-extended. We have a facility that can accommodate the repair, and the technical savvy [I think so at least] to tackle this job. If someone can give me some pointers then I will take a bunch of pictures and post them here for others to reference. Thank you all in advance.

---

RE: How can I replace my slide seals? - encantotom - 07-20-2017

check your email. i sent you some info.

tom

---

RE: How can I replace my slide seals? - bryguymi - 07-20-2017

(07-20-2017, 08:08 AM)encantotom Wrote:  check your email.  i sent you some info.

tom

Tom to the rescue again!  ?

---