You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Dupree sewer hose connection leak. - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Plumbing and fixtures (https://newellgurus.com/forumdisplay.php?fid=9)
+--- Thread: Dupree sewer hose connection leak. (/showthread.php?tid=4133)

Pages: 1 2


Dupree sewer hose connection leak. - rheavn - 04-06-2018

This is a common problem that has been "fixed" using different materials.  I give Ashley Pardue credit for finding an o ring that has resulted in both his and my sewer connection not leaking a drop.

You can source the o rings at:

McMaster Carr-Part #9396k227

or

Amazon--https://www.amazon.com/gp/product/B000FN1132/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Installation tip:  Coat the o ring with silicon grease and stick it on the stationary side of the Dupree sewer connection.  Bring the hose side up and tighten lock ring.  Lock ring is a little hard on the first connection.

I will report back on the durability of the o ring.

Hope this helps someone............................


RE: Dupree sewer hose connection leak. - Land Yacht - 04-07-2018

If it does not drip, it will help me! Ordering today.

Can I assume there is no gasket on the hose side connector?
Thanks Mike


RE: Dupree sewer hose connection leak. - rheavn - 04-07-2018

Nothing on the hose side connector.


RE: Dupree sewer hose connection leak. - pairodice - 04-08-2018

Awesome! Mine is leaking also - will order it today!


RE: Dupree sewer hose connection leak. - House Divided - 04-08-2018

I added the o-ring as well, but on the hose end. I set the o-ring in a bed of silicon and attached the hose with only a partial turn of the locking collar while the silicon "set" leaving some compression of the ring to seal with a full turn of the ring. It has sealed without leaks since last spring.

If I had to do it again, I would follow Steve's approach.


RE: Dupree sewer hose connection leak. - bikestuff - 04-08-2018

What holds it in?


RE: Dupree sewer hose connection leak. - medcrest - 04-25-2018

Note that the Amazon url gets you a unit of 10.


RE: Dupree sewer hose connection leak. - 3Rs - 04-26-2018

During our travels in "The Rolling R Ranch" we met another Newell owner who gave me a suggestion which fixed the sewer hose leak problem.  Before implementing his solution, I carried a supply of Dupree foam rings - at least 6 to 10 of them.  Would change them out as needed, but the new one never lasted very long.  His suggestion:  Do not remove the old ring, just apply another one directly to the old one.  When it leaks again, apply another.  This works great!  I think after the third ring I never had another problem for the remaining three years we traveled in the Newell. I am certain when we sold our coach I had/gave the new owner my supply of foam rings - don't recall it I explained the proceed to him.  (Sorry, Paul.)


RE: Dupree sewer hose connection leak. - NeBob - 05-19-2018

I recently replaced both Dupree valves with no problem. When I bought a new discharge hose I found the connections were a different style.  It seems I heard of a conversion to the new style hose but can find no information on it. Any information would be appreciated


RE: Dupree sewer hose connection leak. - Land Yacht - 05-19-2018

Many of us have created our own Dupree to Valterra conversion solutions.