Fuel tank leak - Printable Version
+- Newell Gurus (
https://newellgurus.com)
+-- Forum: Technical Discussions (
https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Fuel System (
https://newellgurus.com/forumdisplay.php?fid=74)
+--- Thread: Fuel tank leak (
/showthread.php?tid=4293)
RE: Fuel tank leak -
rheavn - 01-13-2019
Great job!!!
RE: Fuel tank leak -
Doug Musick - 01-13-2019
Yes great job. I've had 18 custom aluminum fuel tanks made the last few years for gas, diesel, flex fuels, avgas, jet fuel etc. I used this company for several parts including some custom machined TTMA, blind tapped flanges and the quality was always excellent.
https://www.fueltankparts.com/fuel-tank-parts-accessories.html
I would recommend using aluminum sheeting thicker than 1/8". I used 3/16" and haven't had any problems, but had some failures with 1/8" material. With our stainless steel tanks 1/8" material has worked fine.
RE: Fuel tank leak -
Richard - 01-14-2019
Great Link !
And right around the corner from me, too.
RE: Fuel tank leak -
Jackflash - 02-11-2019
Excellent job and write up. That's one good looking tank.