You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
rv dash vs vmspc - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Engine and Transmission Monitoring Systems (https://newellgurus.com/forumdisplay.php?fid=58)
+--- Thread: rv dash vs vmspc (/showthread.php?tid=4502)

Pages: 1 2


RE: rv dash vs vmspc - jcus - 02-17-2019

No, I have a glass dash now, but a couple of good threads on the irv2 forum.

http://www.irv2.com/forums/f103/vmspc-replacement-option-425748.html


RE: rv dash vs vmspc - Roger 1 - 06-19-2019

I just installed a vms 755 in my coach, that is the only way you can get all of the information available. Any other way you will not get fuel levels, air tank pressure.


RE: rv dash vs vmspc - pairodice - 06-20-2019

Roger, can you post some pictures and how it was installed please? I would love to do this upgrade!


RE: rv dash vs vmspc - Roger 1 - 06-20-2019

    pic of install


RE: rv dash vs vmspc - pairodice - 06-20-2019

That looks great! Did you do this or have someone do it?


RE: rv dash vs vmspc - Roger 1 - 06-21-2019

I installed my self took about a day.  I also moved the radio and hwh control unit.


RE: rv dash vs vmspc - encantotom - 06-21-2019

where did you get the wood looking plastic? i need to replace some.

thanks

tom


RE: rv dash vs vmspc - Roger 1 - 06-21-2019

I ordered it from Amazon. Type in boat blank.you can get it in wood look or carbon fiber. If you can't find it I will post the company's name. Just need to dig it out. 75 bucks for a 2x4 sheet .


RE: rv dash vs vmspc - smagown - 06-21-2019

Roger:
Are your original gauges still installed behind the new panel?
Thanks,


RE: rv dash vs vmspc - Roger 1 - 06-21-2019

No all of the old gauges have been removed. No reason to keep them and you need the sending wire from the fuel gauge also need park brake headlight turn signal high beam and airlines all go into the tm120 that sends the signal to the dash.