You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
led round lights on front of my 02 - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Electrical (https://newellgurus.com/forumdisplay.php?fid=30)
+--- Thread: led round lights on front of my 02 (/showthread.php?tid=462)


led round lights on front of my 02 - encantotom - 01-14-2013

les was asking about these so i thought i would post.

i bought them at ryder fleet products. mine were all hazed over so i replaced them all.

http://www.ryderfleetproducts.com/ryder/af/ryder/core/content/product/srm/key/U13%2010275Y/pn/LED-Light-Sealed-Yellow2.5-Round/erm/productDetail.do

tom

RE: led round lights on front of my 02 - bikestuff - 01-14-2013

Tom,

I had trouble getting the new ones installed. When I asked the folks in Miami about it...they said that they had a specialized tool to get a grip on the lights. (For those that have not removed one, they are mounted with a bayonet type mount. A quarter turn counter-clockwise and then they pop out).

The "tool" is simply a short length of PVC pipe with screws from the inside to the outside. The inside diameter of the pipe matches the outside diameter of the bulb. The heads of the screws grip the indents in the bulb so that you can get some torque on the bulb to re-install. You will have it properly installed when the LEDs are horizontal.

Cheers,
bill

RE: led round lights on front of my 02 - encantotom - 01-14-2013

i had no trouble getting all of them out.

i would guess i will likely never have to replace them again

tom

RE: led round lights on front of my 02 - bikestuff - 01-14-2013

My problem was not getting them out...it was getting them back in! Smile

RE: led round lights on front of my 02 - encantotom - 01-14-2013

oh, i had no problem doing either.

tom

RE: led round lights on front of my 02 - les korcala - 01-22-2013

(01-14-2013, 07:29 PM)encantotom Wrote:  oh, i had no problem doing either.

tom

Tom, Thanks for great contact with light, they came in today , super clear , love it and I had problem removing 2-3 of them , just used big vice gripps with rubber cloth under and they turned loose.
Put the new ones and just test them at night , what difernce makes flat old lenses and new clear ones 1

THANKS AGAIN FOR GOOD CONTACT AND GREAT DEAL!