clear acrylic table leg - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Interior Things (https://newellgurus.com/forumdisplay.php?fid=6)
+--- Thread: clear acrylic table leg (/showthread.php?tid=4778)

---

clear acrylic table leg - encantotom - 02-18-2019

i thought i was a pretty good internet searcher, and i know i have seen these things somewhere.  

the clear acrylic dinette table support leg that is put in when the table is extended.

besides newell, does anyone know where to buy these clear acrylic legs?

thanks

tom

---

RE: clear acrylic table leg - Richard - 02-18-2019

https://www.eplastics.com/plexiglass/acrylic-rod/clear-cast  is one source

the google magic term is cast acrylic rod

---

RE: clear acrylic table leg - encantotom - 02-18-2019

thanks

tom

---

RE: clear acrylic table leg - Rongripon - 02-19-2019

Tom, there is a plastic place in San antonio and I would be happy to give them a call and check the price. not sure if it's the same size as mine..give me the length and diameter and i'll call for you.

---

RE: clear acrylic table leg - encantotom - 02-19-2019

i think i have it covered but if not i will let you know. thanks for the offer ron

tom

---

RE: clear acrylic table leg - Rongripon - 02-25-2019

I've been thinking of getting a piece of mesquite and turning a new leg. It would be different but eye catching.

---

RE: clear acrylic table leg - encantotom - 02-25-2019

that would be nice in clear high gloss finish. fortunately i dont have a lathe or i would need another building out back....ha

tom

---

RE: clear acrylic table leg - pairodice - 02-25-2019

I think we could fit a lathe into your garage lol

---

RE: clear acrylic table leg - Rongripon - 02-26-2019

at one point i was carrying three lathes. I'm down to one now. 

About the high gloss finish, I'd probably use either spar varnish or CA glue..

---

RE: clear acrylic table leg - pairodice - 02-26-2019

I like the look of this custom leg for the table...

---