air pocket door problems - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Air Operated Systems and Leaks (https://newellgurus.com/forumdisplay.php?fid=33)
+--- Thread: air pocket door problems (/showthread.php?tid=4924)

---

RE: air pocket door problems - pairodice - 05-02-2019

I think our regulator for the doors and toilet is in the AH bay also. I’ve never played with it much but our doors open slowly and the toilet stays open probably too long (there is another adjustment in there).
Should I run the pressure up to 50psi? I think it’s at 30 or so now (it’s raining outside)...

---

RE: air pocket door problems - rheavn - 05-02-2019

Microphor's air pressure recommendation is 60-65 psi

---

RE: air pocket door problems - encantotom - 06-11-2019

i replaced the air solenoid valve body. that fixed my problem. the air lines are 1/8 inch od parker parflex. the push to connect fitting that was original leaked when i put the new valve body in. so i ordered new fittings from mcmaster carr and some new tubing i got on ebay and put it all back together yesterday and all is well. door operated perfectly and no leaking fittings.

now we have a bedroom door again. darlene approves....

tom

---