You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
No power - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Emergency Coach Help Needed (https://newellgurus.com/forumdisplay.php?fid=77)
+--- Forum: Help, I need help ASAP (https://newellgurus.com/forumdisplay.php?fid=78)
+--- Thread: No power (/showthread.php?tid=5555)



No power - truman - 07-05-2020

I'm at the beach for afew days and the power panel went blank.no bars
The fridge is out also..with generator on all is good...I reset all the breakers and turned the battery switch off and on underneath
What's next 
Thanks
Truman


RE: No power - Fulltiming - 07-05-2020

Truman, were you on shore power or just running off the batteries and inverter when the power panel went blank? If you were on shore power, I would check the transfer switch. If you were on the inverter and battery power, check the breaker for the inverter and the wiring to the batteries. Do the house batteries appear to be recharging when the generator is running?


RE: No power - truman - 07-05-2020

Just the generator and batteries
The breaker for the inverter is in the reg.ele.house panel ?


RE: No power - Fulltiming - 07-05-2020

There is typically a breaker in the house panel and a breaker on the inverter itself. There is also a fuseable link on the house batteries that can fail breaking the connection. What is the voltage of the house batteries? If they get to low, most inverters will turn themselves off.


RE: No power - truman - 07-05-2020

Tripled checked everything again and it's all set now..no idea what happened
I'll have to keep an eye on it
Thanks for your help


RE: No power - Fulltiming - 07-05-2020

Glad it is back on again. I have had my inverter/charger shut down due to overheating. I would consider cleaning and retightening all the house battery terminals. If your inverter has a control panel similar to my Pro-Sine, you might check to see if it has a setting that allows you to view alarm/fault codes and see if it shows a malfunction. That might give you insight into what happened.


RE: No power - truman - 07-05-2020

quick question
does anyone know the settings for XANTRAX 458 ?
THINKING I MIGHT Have hit it in the dark perhaps changing something
thanks


RE: No power - Fulltiming - 07-05-2020

Here is the manual for the 458.

http://www.xantrex.com/documents/Inverter-Chargers/Freedom-458/Freedom458(445-0193-01-01_rev-2).pdf


RE: No power - truman - 07-06-2020

Thank you