Replacing dump valve fittings. - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Air Operated Systems and Leaks (https://newellgurus.com/forumdisplay.php?fid=33)
+--- Thread: Replacing dump valve fittings. (/showthread.php?tid=588)

---

Replacing dump valve fittings. - rheavn - 03-05-2013

Has anyone replaced the little swivel plastic push in type air line fittings on the air operated dump valve cylinder? If so what fittings did you use?

---

RE: Replacing dump valve fittings. - rheavn - 03-05-2013

I thought I had the plastic swivel type on both of my air dump valves, but my main one in the water bay has metal fittings. They are a push in style but have never leaked. Does any one know where they are available?

---

RE: Replacing dump valve fittings. - Express1 - 03-06-2013

They come with new valve from Dupree

---

RE: Replacing dump valve fittings. - rheavn - 03-06-2013

"They come with new valve from Dupree"

Matt,
Does the "they" refer to the plastic swivel fittings or the metal fittings, or both? I want to at least change the plastic ones to the metal type, although I'd rather get a compression type. I do have an email in to Dupree but have received no reply yet.

---