You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Generator Compartment Insulation - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Generators (https://newellgurus.com/forumdisplay.php?fid=25)
+--- Thread: Generator Compartment Insulation (/showthread.php?tid=5947)



Generator Compartment Insulation - [email protected] - 03-06-2021

1986 40' Classic #121 with a Perkins Diesel Generator. I need to replace the sound deadening insulation in my generator compartment as it is crumbling and falling off. Anyone have any experience with this project? What material did you use? I will likely pull the whole generator and engine out to get good access.


RE: Generator Compartment Insulation - 360 - 03-06-2021

Not from personal experience, but from a Prevost group, here's what was recommended there as the go to material.

https://soundown.com/application-systems/machinery-space-systems/


RE: Generator Compartment Insulation - [email protected] - 03-06-2021

Thanks i will check that out.


RE: Generator Compartment Insulation - HoosierDaddy - 03-06-2021

When I reworked my 1978 Newell I got material from Martin Diesel, Defiance,Ohio


RE: Generator Compartment Insulation - bestgenman - 03-07-2021

I have several 4’ x 5’ sheets of 1-1/2” foil faced with a dampening barrier.   I can send you a picture if you pm me.   It is left over from my manufacturing processes.  You will need a good adhesive and it is recommended to use retaining pins to back up the adhesive and keep it off of hot exhaust.


RE: Generator Compartment Insulation - MrE - 03-08-2021

I went with Thermo-Guard FR 48" X 72" two-sided part #14125 available from Amazon prime $63.08.

"Thermo Guard FR offers the best in heat and sound insulation.  This lightweight, durable shield does everything: reduces sound, absorbs vibration, protects from radiant heat up to 1500 degrees and provides an extra layer of insulating padding.  This product features 100% synthetic fiber felt that provides sound and comfort control and a high-tech foil heat barrier that blocks more than 90% of radiant heat. Being only 1/4" thick, Thermo Guard FR provides a very high level of performance with minimal thickness. Thermo Guard FR is very easy to apply - it can be trimmed to fit anywhere. Great for use in trucks, RVs, buses, cars, aircraft and homes."