You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
new - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Welcome (https://newellgurus.com/forumdisplay.php?fid=1)
+--- Forum: Please introduce yourself (https://newellgurus.com/forumdisplay.php?fid=70)
+--- Thread: new (/showthread.php?tid=6228)



new - Dunkin - 08-06-2021

Two year owner 2002 coach, 624.  Previously 1999 PreVost owner with front and rare rear side door. 2020 28’ stacker/2003 Harley trike/2001 lightning/40 Packard/52 Ford f1/67 corvette/2006rubicon/a very understanding wife.


RE: new - Richard - 08-06-2021

Welcome.


RE: new - Fulltiming - 08-06-2021

Glad to have you join us. You have a unique coach with the wet bath shower in the mid-bath, drop down bunks in the salon, and the large diamond plate roof deck.


RE: new - Dunkin - 08-06-2021

I will certainly be communicating with you. Your absolutely correct and now I’m wondering what else is unique. It has been troublesome so far but I’ve almost gotten caught up on fixes some of which took a lot of time and money. Thanks for your comment.


RE: new - hbens - 08-08-2021

Welcome Aboard!


RE: new - Dunkin - 12-23-2021

Forgot to mention 3 slide seals have been replaced in addition to a trip to Iowa for much needed hwh repair. I’m a novice at navigating websites but my wife will help my communication skills here. I’m old and slow.


RE: new - Ernie - 12-24-2021

I’d like to see a photo of the 2 entry prevost


RE: new - Dunkin - 12-24-2021

Ernie, you can see it at Panterra coach website. It’s the1999 Angola xl. Dunkin


RE: new - pairodice - 12-27-2021

Did HWH actually work on your slides? We drove several hours to their shop several years ago and after being in their shop for several hours a guy walked in, looked at our slides and said ‘nope, this is all custom Newell stuff and we can’t work on it’ and walked out… :-( So I learned to work on it myself…


RE: new - Dunkin - 12-27-2021

I was also told that it was custom but he removed a control box and instantly noticed the problem. A little solder work on the printed circuit board and walk slides again. Elapsed time about 2 hours ($300) and was on my way. The fixer was a 40 year employee and new exactly where to look.