You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Salon slide over-extending - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Slides (https://newellgurus.com/forumdisplay.php?fid=55)
+--- Thread: Salon slide over-extending (/showthread.php?tid=6270)



Salon slide over-extending - pairodice - 08-24-2021

On our most recent trip of about 2 hours I noticed the salon slide was squeaking quite a bit.  When we went to pull the slide out I noticed that the seal was sticking out a little (maybe an 1/8”) - I should have taken a picture.  When the slide is in it is normally pretty much flush with the side walls but this time the slide was pooched out a little.  Will the slideout movement cause the seal to rupture?