You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Landing Lights led replacement? - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Exterior (https://newellgurus.com/forumdisplay.php?fid=7)
+--- Thread: Landing Lights led replacement? (/showthread.php?tid=6513)



Landing Lights led replacement? - pairodice - 12-21-2021

I would like to replace my landing lights and am wondering if I can replace only the bulbs (and how the heck do you get them out of the rubber casing?) or do I just buy new ones?  Anyone with a model number or source for buying these?


RE: Landing Lights led replacement? - Deper10 - 12-21-2021

I had one go out and could not remove it from the rubber housing so I replaced the whole unit with an LED light I found at a local Semi Truck chrome shop. I don't have a part number or product name but it looks great. I will try to get a picture of it next time I am at my coach.

Dario Perini
#581 2001 45'8"


RE: Landing Lights led replacement? - Trainer - 12-21-2021

Look on West Marine website for docking lights.


RE: Landing Lights led replacement? - BusNit - 12-21-2021

Yep, those are typically boat hull lights. Not cheap though.


RE: Landing Lights led replacement? - Richard - 12-22-2021

https://www.amazon.com/gp/product/B08KXQMQCL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Found by @"smagown" a few years ago.

They fit in the rubber housing, or at least the ones I bought did.

So lets quid pro quo, has anyone found the rubber boot? I have looked high and low, I need one.


RE: Landing Lights led replacement? - folivier - 12-22-2021

Richard have you looked at what Betts, Trucklite, and Grote has for the grommet (rubber boot)? They have some open back ones but don't you need the closed back type?
https://www.bettsind.com/wp-content/uploads/Betts_Lamps_Catalog_Section_30.pdf


RE: Landing Lights led replacement? - MrE - 12-22-2021

Here's a closed-back housing that could possibly be modified. https://www.amazon.com/Grote-64930-Utility-Tractor-Housing/dp/B000FBSUQU

[Image: 81agm0T+iRL._AC_SL1500_.jpg]


RE: Landing Lights led replacement? - Richard - 12-22-2021

Tried the open back. Holds the the light but does not fit up like the original. The replacement boot needs the defined flange to work right


RE: Landing Lights led replacement? - smagown - 12-22-2021

V-Star Par 36 15w, about $17 on Amazon. I was able to reuse my closed-back housings, it took a few hours to do the job because of the short wire length and difficulty of getting the housings off. Put a towel or padding down, I dropped one and broke the front glass. They really light up compared to the old incandescent bulbs. PAR 36 is the bulb designation.


RE: Landing Lights led replacement? - TJ Clark - 12-22-2021

A plastic spudger and and dawn dish soap will loosen the rubber to glass bond.