Outback (FX) - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Electrical (https://newellgurus.com/forumdisplay.php?fid=30)
+--- Thread: Outback (FX) (/showthread.php?tid=7466)

---

RE: Outback (FX) - Richard - 08-08-2023

Do you already have a surge protection device?

If not the combination surge protector/transfer switch from Progressive is something to think about.

---

RE: Outback (FX) - TJ Clark - 08-13-2023

(08-08-2023, 04:30 PM)Richard Wrote:  Do you already have a surge protection device?

If not the combination surge protector/transfer switch from Progressive is something to think about.

I have the Surge Guard.

---

RE: Outback (FX) - TJ Clark - 08-21-2023

Furion ATS installed. All the issues I had been describing are gone.

---

RE: Outback (FX) - Richard - 08-21-2023

Thanks for posting the solution.

---

RE: Outback (FX) - TJ Clark - 09-04-2023

The problem has returned.

I am guessing the ATS might have has some issues, but I am now thinking it was not the cause of my inverter cutting out.

---

RE: Outback (FX) - Jack Houpe - 09-04-2023

The inverter should work long as you have DC voltage present, if the DC voltage of your batteries starts to drop then the inverter is not charging and perhaps missing the 110 AC leg feeding it and that would cause inverter to flip out.

---