Slide seal replacement ???’s - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Slides (https://newellgurus.com/forumdisplay.php?fid=55)
+--- Thread: Slide seal replacement ???’s (/showthread.php?tid=7729)

---

Slide seal replacement ???’s - Lonestar38ZRC - 12-07-2023

I’m the new owner of coach #606, and rather quickly trying to work through some maintenance items. The biggest item I am working on being the slide out seals. I’ve researched extensively what it takes to replace them, and although I feel I could tackle this task, I don’t want to get in a bind and mess up or have to do the repair twice. I reached out to Motorhomes of Texas and had them shoot me a rough estimate for all 4 seals.  My expectation was to pay around $1200-$1300 each for the material, and $2500+/- each for labor.  
MOT just quoted me a little over $3k each for the seals, and over $4k each for labor. Grand total right at $30k. 
Has anyone recently completed this repair?  Are my expectations way out of line?

---

RE: Slide seal replacement ???’s - Trainer - 12-07-2023

Please call me. Rudy Legett. 7 one3. 8 one 8. 3234

---

RE: Slide seal replacement ???’s - Richard - 12-07-2023

Do you have HWH or Valid slides?

---

RE: Slide seal replacement ???’s - Jack Houpe - 12-08-2023

That was going to be my questions also Richard, Lonestar If your going to replace the seals on either valid or HWH the seal track must have special attention, it must be totally adhered to the metal frame on the bottom and up the sides about 6" this is where all the water is coming in from and rotting out floors and getting into compartments below and it must be cleaned of all the old glue that adheres the seal to the tract before you start putting a new one in. If you have HWH slides you its a very difficult job and there are many other things that will need attention before you reinsert the slide.

---

RE: Slide seal replacement ???’s - Fulltiming - 12-08-2023

#606 is the next to the last 2001 model and has HWH slides.

---

RE: Slide seal replacement ???’s - Jack Houpe - 12-09-2023

HWH is not the answer I was hoping for, I've done both front and rear slides on our 2 slide HWH coach not knowing what a 4 slide coach consists of and how 4 slides work I will back out now. If it were Valid slides I would say follow instructions and take your time to do it right so it doesn't have to be done again but HWH requires a lot of equipment that normal people do not have.

---

RE: Slide seal replacement ???’s - encantotom - 12-09-2023

If you are anywhere near az I have a slide cart


I have done 4 flat floor slide seals
I thought newell only charged around 3k?

Tom

---

RE: Slide seal replacement ???’s - Jack Houpe - 12-09-2023

Tom what is a flat floor and is it different from what we have?

---

RE: Slide seal replacement ???’s - encantotom - 12-09-2023

the slides that have a floor that is flat with the rest of the floor are flat floor. that would be the front salon slides and most likely the bedroom slide across from the bed.

the beds are on a raised platform with the mechanism above the floor. on those, you dont have to take the slide out, you disconnect it and bring it in.

my coach was a race coach with no bedroom so the one driver slide slide is a flat floor. i made a bed and end tables for it.

tom

---

RE: Slide seal replacement ???’s - Jack Houpe - 12-09-2023

Thanks! The rear raised floor slide is easier to work on far as slide seal.

---