ceiling fan - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Repair Maintain and Inspect (https://newellgurus.com/forumdisplay.php?fid=19)
+--- Forum: General Repair (https://newellgurus.com/forumdisplay.php?fid=23)
+--- Thread: ceiling fan (/showthread.php?tid=814)

---

ceiling fan - ashley - 05-30-2013

Does anyone have a spare blade arm for 42 inch craftmade ceiling fan. 281-687-8687

---

RE: ceiling fan - Chester Stone - 05-30-2013

I do not have a spare blade, but would like to know how to balance mine. It shakes at any speed more than very slow.

---

RE: ceiling fan - Ozarkguy - 05-30-2013

Home Depot sells balancing kits.

How to....

http://m.youtube.com/#/watch?v=VIWuIqPlZW8&desktop_uri=%2Fwatch%3Fv%3DVIWuIqPlZW8

---

RE: ceiling fan - folivier - 05-30-2013

I have always been a big "fan" of Hunter Classic ceiling fans. Not the new type but the old cast iron pancake motors. If I could find one with the smaller blades I'd gladly change out the one in my coach.
In fact I have one of the last brass fans they made sitting in the box for whenever I buy another house.

---

RE: ceiling fan - Ozarkguy - 05-31-2013

You might check Amazon... appears they have some.
http://www.amazon.com/WESTINGHOUSE-77400-FAN-BLADE-ARM/dp/B000HM8FA8/ref=sr_1_4?ie=UTF8&qid=1370005451&sr=8-4&keywords=ceiling+fan+arms

---

RE: ceiling fan - ashley - 05-31-2013

Has to be craft made

---

RE: ceiling fan - Trainer - 05-31-2013

Ashley,

Have you considered replacing all of the arms with matching new ones? Would the new arms have matching mounting holes, lack of which would be nearly a deal killer?

---

RE: ceiling fan - ashley - 05-31-2013

Rudy tried that but holes would not match. Factory quit making them. Hoping someone had to replace one. Comes four even if you need one

---

RE: ceiling fan - Ozarkguy - 05-31-2013

do you no the bolt hole spacing.. many have the same spacing.. there is a lot out there..
http://www.ebay.com/sch/i.html?_trksid=p2047675.m570.l1313.TR0.TRC0&_nkw=Ceiling+Fan+Blade+Arm+&_sacat=0&_from=R40

---

RE: ceiling fan - ashley - 05-31-2013

Its not just the hole spacing but the curve of the holder to position the blade in the proper place

---