Aqua Hot antifreeze leaks - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Heating Systems (https://newellgurus.com/forumdisplay.php?fid=11)
+--- Thread: Aqua Hot antifreeze leaks (/showthread.php?tid=975)

---

RE: Aqua Hot antifreeze leaks - encantotom - 08-29-2013

more pictures from steve

---

RE: Aqua Hot antifreeze leaks - folivier - 08-29-2013

Nice job Steve!

---

RE: Aqua Hot antifreeze leaks - ccjohnson - 08-29-2013

Steve, Keep an eye on the connections between the 2 different metals. Any time 2 different metals contact, you can set up a localized "corrosion cell"

---

RE: Aqua Hot antifreeze leaks - smagown - 08-30-2013

I didn't want to mix the metals but couldn't get every thing in either galvanized or brass. Articdude is right, Pex is being used too. Now that I've done this it may be that I will do it over in Pex. I put a union in the long manifold so it is easy to take out now. Just about ready to pressure test.

---