09-27-2019, 02:00 PM
I found it in the PSX-240-Relay manual: 141
A follow-on questions. What does the PSX-240-Relay do? It looks like it should take a single-phase input from the inverters (and possible 30A shore power) and produce a dual-phase output. If that were the case the 240V appliances should work, but they don't. So has it another purpose - to connect single-phase to both legs and therefore power any 120V loads, but not power 240V loads (because they are the same phase).
A follow-on questions. What does the PSX-240-Relay do? It looks like it should take a single-phase input from the inverters (and possible 30A shore power) and produce a dual-phase output. If that were the case the 240V appliances should work, but they don't. So has it another purpose - to connect single-phase to both legs and therefore power any 120V loads, but not power 240V loads (because they are the same phase).
Mick & Renee
2009 Newell 45’ 8” #1277, C15 625HP 12-speed ZF
Full time working and traveling.