05-23-2020, 02:25 PM
Forest,
It was early and did not want to wake up my Wife or as Richard put it "beg her" to hold the button:-).....I was not able to check voltages under load. Since the hydraulics ran the bedroom slide with no issues I used my big assumption card that it was probably ok. I will get a chance to measure voltages with it working normally in the next day or so for a base line and report back.
Tom,
On our coach I have not seen the magnets but did note the pins lock down on extension and retraction after re-seating the connectors. I did not pay attention to the locks release or lock down when this problem came up. So far the slide has worked normally in the several times that I have tried it out.
It was early and did not want to wake up my Wife or as Richard put it "beg her" to hold the button:-).....I was not able to check voltages under load. Since the hydraulics ran the bedroom slide with no issues I used my big assumption card that it was probably ok. I will get a chance to measure voltages with it working normally in the next day or so for a base line and report back.
Tom,
On our coach I have not seen the magnets but did note the pins lock down on extension and retraction after re-seating the connectors. I did not pay attention to the locks release or lock down when this problem came up. So far the slide has worked normally in the several times that I have tried it out.
Steve & Doris Denton
45' Newell #525, Bath & Half
2014 Honda CRV Toad
Summerfield, FL