12-31-2020, 02:20 PM
PM me and I'll send you the manual I have. For me it is the right family of seats but the wrong model. The easiest way is to put air back on it and see what is leaking. If it is a damaged hose you can probably repair it without a manual, just replace one line at a time until you are out of leaks. If you seat is like mine it takes a 4mm OD "plastic" hose that is not readily available. I found it at Monarch Automation, 513 874-6566, part # PUN-4X0, 75-SW. It was a little over $7 for 12ft. (way more than you'll need but had to make minimum). My coach has an air shutoff valve in the floor against the wall for the seat. It has proven to be handy when a line fails and you have big air leak while you're going down the road.