You are not logged in or registered. Please login or register to use the full functionality of this board...


What hydraulic fluid do I use?
#1

I lost about a gallon of fluid when my gauge sprang a leak. This is the fluid that operates the fan and perhaps the steering. Should I buy hydraulic fluid and if so what weight? If Dextron III is recommended, can I put in synthetic?

2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica
Reply
#2

I used power steering fluid in mine, I believe its real close to 32 hydraulic fluid. Atf will work too, I havent used much synthetic, but was thinking of changing my trans fluid to the allison synthetic. I have heard people using engine oil in their power steering/ fan setup.

Love old schoolHeart
1976 Newell 8.3 cummins allison 6spd
1977 Newell 8.3 cummins allison 6spd
Reply
#3

If you use engine oil in the power steering hydraulic fan set up you MUST completely clean the system of the old fluid or the engine oil will form tar balls.

Chester, what color is the distinguished fluid? Red like ATF? Or darker like hyd fluid?

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply
#4

Chester, mine is ATF. It is red.

Chappell and Mary
2004 Foretravel 36 foot
Reply
#5

It is red, so it must be ATF. That is what I will use.

2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)