You are not logged in or registered. Please login or register to use the full functionality of this board...


Microphor air operated toilets
#11

To add to Richard's post, the hopper is bolted or screwed (not sure which you have) and most generally they are really corroded.  It's a good bet the leak is where the hopper is attached.  Those fasteners can be a little difficult to remove without damage and damage is not what you want so be careful.  When I had the same problem, the fasteners went back as stainless and the holes were drilled out to accept 10-32 pan head machine screws.  I can't remember if the holes were drilled & tapped or nuts were used.  Either way works.  The gasket was a good grade of silicone on a super clean surface.  It's not a pleasant job but the reward is very satisfying!!

Gordon Jones
2000-45'-2slide-#567
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)