You are not logged in or registered. Please login or register to use the full functionality of this board...


Waste Tank Sending Unit replacement
#1

Hi,
Silverleaf shows waste tank is 100% full even after emptying.
Have flushed mx times. even with enzymes.
Have cleaned contacts on, what appears to be a "telephone" line at sending unit.
Have swapped "black" tank connection with "fresh"... then shows "fresh" at 100% full.
I assume I have a bad sending unit from the waste tank.
Was advised to tip coach to curb side before attempting replacement.
Any other helpful suggestions other than haz mat suit??
Any other tests to do before I replace?
Thanks.
Richard

Richard & Marla
2017 Newell
Coach 1608
4 slides
45' 8"
Cummins 600 Allison transmission 6 speed
F150 Toad
Porsche C4S cabriolet
F350
Cadillac Escalade
Reply
#2

Are you talking about replacing a sensor that penetrates the tank wall or a sliver leaf box that is wired to the sensors and the display panel?
Reply
#3

The sensor that penetrates waste tank. The silver leaf box appears to be fine.

Richard & Marla
2017 Newell
Coach 1608
4 slides
45' 8"
Cummins 600 Allison transmission 6 speed
F150 Toad
Porsche C4S cabriolet
F350
Cadillac Escalade
Reply
#4

https://russontheroad.wordpress.com/user...tial-fixes

Might want to read this

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)