You are not logged in or registered. Please login or register to use the full functionality of this board...

Fuel, water separator filter
#1
I am looking for a con met cm99-500d filter. It seems that con met now only deals in hubs and brake drums. Does anybody have a source or cross reference number. Thanks in advance.
Fishinator, 1987 #132
Reply
#2
i remember when i looked for one when i had my 90 i had no luck. easier to just replace it with a modern version

tom
2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#3
(07-09-2017, 09:20 PM)encantotom Wrote: i remember when i looked for one when i had my 90 i had no luck.  easier to just replace it with a modern version

tom

So i have been looking for a replacement setup, do you remember what you replaced it with?
Fishinator, 1987 #132
Reply
#4
i didnt. i just plugged the leaks and didnt use it. not the best solution, but thats what i did. there was two of them on my 90. i replaced the pitcocks and then no matter what they leaked. so i plugged the pitcock hole.

tom
2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#5
I have a Conmet CM99-327D water separator on my generator. I could not find service parts for it either but found a new old stock one that I used to replace it. I do not know the difference between the 500 and the 327 but the place where I bought mine seems to have another 327 available if it would work.

https://vehiclepartsdirect.com/product-p...-separator
Marcus

1983 Newell
Reply
#6
(07-17-2017, 01:45 PM)MPerry Wrote: I have a Conmet CM99-327D water separator on my generator. I could not find service parts for it either but found a new old stock one that I used to replace it. I do not know the difference between the 500 and the 327 but the place where I bought mine seems to have another 327 available if it would work.

https://vehiclepartsdirect.com/product-p...-separator

thanks i'll check it out.
Fishinator, 1987 #132
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)