You are not logged in or registered. Please login or register to use the full functionality of this board...


tow lights for Chevy Silverado?
#1

Just picked up a 2004 truck, ordered the baseplates, now what is the best way to set up lights?
On my jeep I added a bulb in the light housing and ran wires through the frame, that worked pretty good.
Magnetic lights?
Something like these glued on the bumper? http://www.ebay.com/itm/2-LED-15-Slimlin...519ff5b676

Later on I'll probably carry a RZR in the back with the tailgate down so need to keep that in mind when I add lights.

Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486 

1993 Newell 39' #337 
Reply
#2

İmage
(09-27-2012, 06:00 AM)folivier Wrote:  Just picked up a 2004 truck, ordered the baseplates, now what is the best way to set up lights?
On my jeep I added a bulb in the light housing and ran wires through the frame, that worked pretty good.
Magnetic lights?
Something like these glued on the bumper? http://www.ebay.com/itm/2-LED-15-Slimlin...519ff5b676

Later on I'll probably carry a RZR in the back with the tailgate down so need to keep that in mind when I add lights.
I think the bulbs in the housing work great. Some of the wireless light bars are good. I have just finished my M/C rack for the RZR and will be trying this weekend.


Attached Files Thumbnail(s)
   

1996 #422 and 2004 #689 with YELLOW Goldwing, BMW K1200S, RZR, Dodge Truck

Reply
#3

I would look at these, they would be much easier to use;
http://www.ebay.com/sch/i.html?_trksid=p...s&_sacat=0

Steve & Patti, Bonnie and Tucker
1982 Newell 38' Classic, DD 6V92
cocktails for as many will fit in the site, dinner for as many can sit at the pick-nick table and sleeps 2 since I fixed the couch
Reply
#4

Just finished installing the Demco baseplate and lights. I ran wire along the frame to the rear then hooked them up to these lights I put on the bumper: http://www.ebay.com/itm/190726345998?ite...60&vxp=mtr

These are the waterproof flexible LED strips that attach with 3M tape. But they include a controller (sealed so I couldn't peek) so you have brake/turn/tail/backup lights.

Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486 

1993 Newell 39' #337 
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)