You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus 2018 Rally May 1-8 at Bella Terra in Foley, Alabama Check out Rally Thread

bode door button
#1
Hi Guys,
Does anyone know who makes the door button on a 2008?
mine appears to be a bit sticky! it sometimes takes 10 or so presses for it to work and open the door.
Thanks
Rob
2008 NEWELL C-15 ZF 1218
Reply
#2
Rob,
Don't know the maker of the switch.

"mine appears to be a bit sticky!"

I'm assuming that you have the round silver metal door button.  I would try a little silicone spray after depressing the button.
Steve Bare
1999 Newell 2 slide #531
Reply
#3
(02-04-2018, 09:42 AM)rheavn Wrote: Rob,
Don't know the maker of the switch.

"mine appears to be a bit sticky!"

I'm assuming that you have the round silver metal door button.  I would try a little silicone spray after depressing the button.

yes it is the round silver metal button, Sticky may not be the right explanation.....it appears to depress properly but does not operate the door, 10 or so fast presses will get it to operate.
But i will be going for the silicone spray for the first option!
thank for the advise 
allt he best
Rob
2008 NEWELL C-15 ZF 1218
Reply
#4
It's not a pneumatic button, but a
Simple
Electrical button. Sounds like the contacts are
Dirty. Spray it with contact cleaner
Richard and Rhonda Entrekin
99 Newell, 512
Subaru Outback Toad
Inverness, FL (when we're home Cool )
Reply
#5
Yes contact cleaner rather than silicon spray

Tom
2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)