You are not logged in or registered. Please login or register to use the full functionality of this board...


Fuel tank leak
#11

Great job!!!

Steve Bare
1999 Newell 2 slide #531
Reply
#12

Yes great job.  I've had 18 custom aluminum fuel tanks made the last few years for gas, diesel, flex fuels, avgas, jet fuel etc.  I used this company for several parts including some custom machined TTMA, blind tapped flanges and the quality was always excellent.

https://www.fueltankparts.com/fuel-tank-...ories.html

I would recommend using aluminum sheeting thicker than 1/8".  I used 3/16" and haven't had any problems, but had some failures with 1/8" material.  With our stainless steel tanks 1/8" material has worked fine.
Reply
#13

Great Link !

And right around the corner from me, too.

Richard and Rhonda Entrekin
99 Newell, 512
Subaru Outback Toad
Inverness, FL (when we're home Cool )
Reply
#14

Excellent job and write up.  That's one good looking tank.

Jack and Dianna Hunt
Coach #663
2003 - 45' triple slide
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)