You are not logged in or registered. Please login or register to use the full functionality of this board...


Kohler generator carriage rollers
#1

There are eight rollers for the generator to slide out, mounted to the carriage.
The roller is a McGill CF 1 1/2 S cam follower. The stud is 5/8 inch with fine threads. $30 to $40 online.

Steve Magown
Calhoun, LA
2001 Prevost H3 Vantare
formerly Newell #458
Reply
#2

Are these them?

https://www.amazon.com/McGill-Follower-S...B0071APQXS

Steve Bare
1999 Newell 2 slide #531
Reply
#3

thanks steve m.....as you know i need to replace one of mine

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#4

Yes, Steve, that is the roller for our front mounted generators.

Steve Magown
Calhoun, LA
2001 Prevost H3 Vantare
formerly Newell #458
Reply
#5

Thanks Steve.....................................that makes it very easy for the "next guy".

Steve Bare
1999 Newell 2 slide #531
Reply
#6

steve m are you sure?

here is the description for the one you posted

McGill CF1 1/2SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-1/2" Roller Diameter, 7/8" Roller Width, 1-1/2" Stud Length, 5/8" Thread Size, 2-13/32" Overall Length, 0.625" Stud Diameter/

i have one that is broken and i just measured it with a digital caliper. mine is 1 3/8 diameter, 3/4 inches wide and a 1/2" diameter of the stud.

would you please check yours with a caliper and confirm?

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#7

My "97 is 1 1/2 " with a 5/8" stud with fine threads. Looks like there may have been a change between '97 & '02.

Steve Magown
Calhoun, LA
2001 Prevost H3 Vantare
formerly Newell #458
Reply
#8

this is the one from my coach

a CR22v cam follower with the dimensions i measured.

no two newells are the same

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#9

in closer look, mine has 12 of these things on it.  however, the one that broke is one of two they used as a stop at the front.  that is why my genny does a dance when it comes out.  it goes farther on one side than the other.  

i called IKO who makes mine and got the part number for the same roller cam only with a hex head to make it easier to install.  it is a CR22VB

found them on ebay for 36 bucks for two of them shipped

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#10

Another example of no two Newells being the same.  Magowns' '97 genset has 8 rollers, Tom's 2002 has 12 and my '99 has 10. Huh

Steve Bare
1999 Newell 2 slide #531
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)