You are not logged in or registered. Please login or register to use the full functionality of this board...


Drive Axle Bearings & Seal
#11

They work great in the shop, but I still use 8x8 wood blocks for when I travel.

Steve Bare
1999 Newell 2 slide #531
Reply
#12

(09-13-2018, 08:14 AM)Jackflash Wrote:  Climbed under the coach (don't like doing that) and found the tag on the axle, I have a Meritor 23k lb unit with manual diff. lock and Bendix air disc brakes.  Called Meritor to get the correct bearing and seal numbers, they are very helpful.
Outer bearing and race numbers are 580 and 572
Inner bearing and race numbers are 594A and 592A
Meritor seal number is A1205V2492
Bearings and seal are in their way, should have it back together late next week.
Hey Jack, did you order the parts from Meritor?

Life is what you make it.
Reply
#13

The bearings and races I got off Amazon, the seal was from Meritor.

Jack and Dianna Hunt
Coach #663
2003 - 45' triple slide
Reply
#14

Got the bearings installed      Meritor recommends .001 to.005 run out, I got it to about .0025      , calling that good.  Had to clean the gasket off the axle      then installed it. All back together, 450 ft/lbs of torque on the lug nuts is work to get, just have take it for a shot drive then re-torque.      Now back to the air systems. Smile

Jack and Dianna Hunt
Coach #663
2003 - 45' triple slide
Reply
#15

So are you confident the spindles are ok?

Life is what you make it.
Reply
#16

I'm thinking so, I took to it with some emery cloth and it cleaned up really well.

Jack and Dianna Hunt
Coach #663
2003 - 45' triple slide
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)