You are not logged in or registered. Please login or register to use the full functionality of this board...


Pulling codes
#1

Hi guys, and gals, thanks in advance for the assistance, 1993 8v92 will not go over about 10mph, I have a Detroit computer with a 6 pin round connector, the coach has a rectangular connector, does anyone have the pin layout for me to install the round 6 pin?? Sub question do these have the code flash feature installed??
Reply
#2

here is the pinout for the rectangular plug on mine

tom


Attached Files Thumbnail(s)
   

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#3

Thank you Tom..

Now if I can find the pin out on the scanner side I’ll be ok business. Lol
Reply
#4

Are you using a regular car code reader like an ODBII?

Karen & Adrian Abshire 
1998 2 slide 45' Newell Coach 498 
Prior: 1985 Foretravel ORED 35, 1988 38' Foretravel U280, 2000 Foretravel 42' U320, 1990 Bluebird Wanderlodge WB40
Reply
#5

adrian, you cant use obdii on a detroit. that is what ddec is. their interconnection

i have a 6 pin connector for my vmspc that i carry in case someone needs to use it

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#6

I have an actual Detroit computer.. Tom I don’t suppose you have the pinout for the 6 pin side do you?? I’m going to look in the computer manual when I get home it may be in there.. thanks again for the help..
Reply
#7

i will go out in the shop and see if i can wring it out real quick. it is only 4 wires that are used.

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#8

it is late and i am tired....but i think this is right.  i happen to have both the rectangular and round 6 pin cables for the vmspc.  

the round plug diagram is staring at the end where the pins are.  (not the back where the wires go in)

tom


Attached Files Thumbnail(s)
   

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)