You are not logged in or registered. Please login or register to use the full functionality of this board...


Waste valve & plumbing redo
#1

Has anyone ever redone their waste (black tank) piping?
I have the old Thetford dump valves on mine. The gray water bypass valve, the one that isolates the black tank, is leaking internally. These have to be unscrewed and be split apart not like the Dupre valves with the removable top. I'd like to replace it with a different valve.
The main waste dump valve is also showing it's age so I'd like to replace that one also.
I won't do this until next winter when I have a week or so to work on it but would like to start getting ideas.
I guess the fittings are all glued and I won't be able to take them apart to put in new valves so I'll plan to just buy all new fittings & valves and rebuild a new system.
Any idea how to remove the pipe from the tank?

Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486 

1993 Newell 39' #337 
Reply
#2

wally did a really nice job on redoing all of his. i hope wally will comment or show pictures.

to make it easier, what he did was cut it in front of the tank so he didnt have to take it out. he cut it far enough out that he could put one of the rubber sewer couplers that have the clamps. he did that in several places so it could be removed again if needed if i recall. it was a real nice job that he did.

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#3

Sounds much easier to do it this way.
Hopefully Wally is coming to Spearfish, I'd love to see how it turned out.

Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486 

1993 Newell 39' #337 
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)