You are not logged in or registered. Please login or register to use the full functionality of this board...


genny digital temp gauge reads low all the time
#1

this just started happening. the connections are ok. if you short the wire to the gauge that the sender is on it scrolls high like it should. i ran a jumper to the sender on the genny and it works. the sender ohms out to 1.1k ohms which is in spec.

so i have a bad wire from the sender to the gauge over the driver. not gonna be any fun to run new one. sounds like a wintertime project

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#2

This happened to me when I first bought the coach for several months and couldn't even get a temp reading on the gauge until and after I had it serviced it was only reading "low" all the time and started showing temps after a full service of everything including oil, all filters, belts, rad cap and inspection of and tightening of all wires including a not so tight ground


Larry, Hedy & Benny Brachfeld
2003  Coach # 646
2 Slide, DD
MINI Cooper Clubman S
MINI Clubman , John Cooper Works Rally Edition # 3 of 70
Monster 1000 Watt, Electric Skateboard
Yamaha Golf Cart painted Kawasaki Green
A Coach driveway with a shade structure and swimming pool 
A Pueblo Home on the Border
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)