Posts: 835
Threads: 58
Joined: Aug 2012
Hi All,
Having some plumbing bay issues. does anyone have a source for the PMMI Tank monitors ? I have two located over the micro inside and one installed on the chrome fascia in the water bay. The company no longer makes them from what I understand and Newell hasn't come up with a resolve yet since they started having them fail. This is the 3x6 board and the red readout for pure and waste is about 1x3 with a display in little round red dots.
Larry, Hedy & Benny Brachfeld
2003 Coach # 646
2 Slide, DD
MINI Cooper Clubman S
MINI Clubman , John Cooper Works Rally Edition # 3 of 70
Monster 1000 Watt, Electric Skateboard
Yamaha Golf Cart painted Kawasaki Green
A Coach driveway with a shade structure and swimming pool
A Pueblo Home on the Border
Posts: 2,651
Threads: 225
Joined: Jul 2012
Did you make sure the ribbon cable is plugged in?
On mine the display in the basement didn't work until I plugged the cable back in.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337
Posts: 835
Threads: 58
Joined: Aug 2012
It's in Forest and looking for a replacement monitor....Any source ? Newell says stopped making long time ago and has no fix/replacement.
Anyone have a part # , source, rebuilder ???
Larry, Hedy & Benny Brachfeld
2003 Coach # 646
2 Slide, DD
MINI Cooper Clubman S
MINI Clubman , John Cooper Works Rally Edition # 3 of 70
Monster 1000 Watt, Electric Skateboard
Yamaha Golf Cart painted Kawasaki Green
A Coach driveway with a shade structure and swimming pool
A Pueblo Home on the Border
Posts: 2,651
Threads: 225
Joined: Jul 2012
Here is some contact info but don't know any more.
http://www.pmmi-electronics.com
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337
Posts: 429
Threads: 20
Joined: Jul 2012
That's a Houston number me thinks.
I'll there later this week.
Steve Magown
Calhoun, LA
2001 Prevost H3 Vantare
formerly Newell #458
Posts: 5,106
Threads: 249
Joined: Jul 2012
When mine failed I found a bad solder connection on the board
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)
Posts: 835
Threads: 58
Joined: Aug 2012
Taking out monitor later this week when I have dry ground to work on and will look it over and try to clean all the contacts and magnify the solder points. May be an easy fix. HaHa... Good news is I cleaned up my Mach 5 problem by cleaning all the calcium gunk out of everything and flushing over and over the entire system.
Larry, Hedy & Benny Brachfeld
2003 Coach # 646
2 Slide, DD
MINI Cooper Clubman S
MINI Clubman , John Cooper Works Rally Edition # 3 of 70
Monster 1000 Watt, Electric Skateboard
Yamaha Golf Cart painted Kawasaki Green
A Coach driveway with a shade structure and swimming pool
A Pueblo Home on the Border
Posts: 108
Threads: 5
Joined: Nov 2012
Larry
We went with seelevel gauges set up
www.rvgauge.com
Might take a look and see if that will work
