Newell Gurus

Full Version: bay area 120 power
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Lost power to my 110 receptacle in the bay area in front of plumbing bay. Have checked breakers in main panel an all are ok. Is there breakers for that plug that I Have not found as of yet? 95 Newell #372 Mike
If yours are like mine go reset your gfi outlet in your bathroom.
The front outlet in my plumbing bay is dedicated to the 120V water pump. The switch in the galley will control the power going to the outlet. Also, in my coach, there is another breaker panel in the basement (compartment in front of water bay).
i am with steve. there is most likely going to be a gfi outlet somewhere

tom
Same problem for me, gfi underneath cabinets in galley
Thanks everyone. It was the Gfi.
My bay area  power has gone out again. The last time it was the gfi in the bath area that was suggested here on the site. I reset it this time but with no results to the bay. Any other suggestions?
Did you check to make sure that you have power at the gfi in the bath? Could be that the gfi needs replacing.
thanks jon. replaced gfi. I only had 96 volts in the bay. all is working. more than likely orginal and tripped many times over the years.