Newell Gurus

Full Version: Classic Basement Door Latches
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I am looking for some new basement door latches for our classic.  I'm looking for the actual latch and the part in the picture below.  It holds the doors open, they tend o break.  I have two that work out of 9.  I think the actual door latch is a Ford part but can't find a part number on any of them.  

Would any other Classic owners know if these were original and where I might be able to find them? If there not original do you know what was?  Trying to keep everything as original as possible on the exterior.  

Ok, lights may be a exception to the original.  Has anyone replaced all their exterior lights with LED's?  Do you like the way it looks? 

Thanks,
Roy...
[attachment=3863]

Part attached to body of coach.

[attachment=3864]

This is attached to the exterior of the basement door.
Hi Roy,
I found new stainless steel latch handles here:
http://www.orrorr.com/index.html
I don't know if they have the door catches you need. I would call them directly because it is possible they don't have everything online. They have a real nice print catalog.
If you cant find new ones I believe those could be removed, cleaned up and restored.
Although I am interested in a replacement source, too, I have to say my experience is they do not tend to break easily. In the 8 years I have owned my 1982, and over 53,000 miles driven not one has broken, or even looks like it will. I see your Newell is a 1974, and maybe I haven't reached the magic age where they start breaking.
Thanks for the information.

Clarke,
My door latches are in good condition, they are tarnished and the coating is peeling off them. I haven't figured out how to refinish them. Replacing might be reasonable and much faster.

The little holders at the top that keep the door in the open position have all broke but two. I think they are stainless steel but they are soft like aluminum and break when they bend.

Thanks,
Roy...