Newell Gurus

Full Version: speedometer quit
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4
(10-18-2017, 07:27 AM)ccjohnson Wrote: [ -> ]Larry,
There is always the black vinyl electrical tape repair.  Just put a piece of tape over the light!

Thanks for the input CC. There were always 2 very important items we always carried in the Newell, Zip ties and Duct tape. Never left without a good supply. ( I should include JB Weld also!)
If you are going to drive to the shop, do not shut off the chassis batteries whiLe waiting for the shop to get to it. Doing so will delete all the codes stored in the ECU.

My 93 with HT741 does not have any speed sensors mounted externally on the output shaft.
(10-18-2017, 05:01 PM)77newell Wrote: [ -> ]If you are going to drive to the shop, do not shut off the chassis batteries whiLe waiting for the shop to get to it. Doing so will delete all the codes stored in the ECU.

My 93 with HT741 does not have any speed sensors mounted externally on the output shaft.

Thanks Jon, I'll keep that in mind.
Please note my post; Service Alert. I should have added that on this blog but just to bring you current, I am going in for service on 6-21 and will let you know what they find. Thanks for all the comments, they are very helpful.
Pages: 1 2 3 4