Hello,
We wanted to try out our dishwasher since my wife used as storage haha!
We started cycle and after 5 minutes or so I get bip,bip.... and nothing , looks like we are not getting water in to the washer?
I did checked the valve and its fully open at the plumbing bay outside of the coach.
Any idea what else to look for?
Thanks ,
Les
If you can check behind the dishwasher to make sure the water line wasn't disconnected by the previous owner. Maybe they winterized it?
I'm surprised that MOT didn't include checking the dishwasher for proper function while they were doing their PDI. They are usually pretty thorough.
chuck, this is for les, not forest....
tom
(03-27-2013, 05:30 PM)encantotom Wrote: [ -> ]chuck, this is for les, not forest....
tom
Oops!! Senior Moment...........
(03-27-2013, 01:30 PM)Ozarkguy Wrote: [ -> ]My Neax move would be here: http://www.fisherpaykel.com/customer-car...ooting/#q1 24 hr answer service
Called the Company ( NZ ) they put me on hold for like 10 minutes , than lady said I should get serviced ! not much help from them! We are on the road and traveling and was hoping to get tip or two what to look for , gave them the beep codes etc. did not help at all?
I need to see if i can remove it bit to get to the hose part of it sice is tight agains the side wall.
We found the problem here at Newell
Maim motor is seized up and won't turn and wont allow water to get in to Dish Washer!
Newell had part but its for newer model & looks like they don't make this part anymore for 2000 model! he-he, we might be using our dish washer as storage!!
Les
Had a dishwasher on my 93 Bluebird that didn't work. With a little adjustment of the opening it is just right for a 12 bottle wine storage unit.
I use mine to store cold drink cans.