Newell Gurus

Sure... the green/red was high fan and green/wht was low Brown was ground.

Here is the completed and working install of the WAY less expensive and slightly better spec heat exchanger Steve and i installed under the Sofa.

Works very well. Though I need a better way to go from 2 1/2" duct (Newell OEM) to the 1.6" outlet ports on the unit.

Nice work guys! Looks great. Can you tell if it is any quieter? For an adapter check this out....https://www.amazon.com/WORKSHOP-Wet-Dry-WS25007A-Universal/dp/B00FX2TGNM/ref=asc_df_B00FX2TGNM&mcid=5734c0adba5c3b13a8804fa6a118a427?tag=bngsmtphsnus-20&linkCode=df0&hvadid=80333185695376&hvnetw=s&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4583932713546105&psc=1

Thanks!

After a few days to work in the bearings, I do believe that it's a bit quieter!

I wonder if that adapter would have problems with the heat?

On our coach the front heater has an ABS shroud....last time I was in there and other than a few cracks in the corners (now repaired) it was holding up pretty good. I would think that adapter would be fine. Again great work and if I have to replace mine I'll be reviewing this thread.

Do you mean the rectangular box adapter with the hoses coming out? If so, that wouldn't work as the new heat exchanger unit is a dimensioanally smaller rectangle and has 4 round 1.6" ports on the front of the metal face already.