A/C resistor for dash AC on P2000i - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Air Conditioning (https://newellgurus.com/forumdisplay.php?fid=8)
+--- Thread: A/C resistor for dash AC on P2000i (/showthread.php?tid=8269)

---

RE: A/C resistor for dash AC on P2000i - justinn - 07-12-2025

(07-09-2025, 08:19 PM)jdkskyking Wrote:  Moving forward:

Now that's doing it right, Jeff! Proactive repair!

I didn't get that far in to mine as I had no room to work without pulling half the dash out. While I was in there, I did fix a few grounds and positives under the dash though. Your bus bar idea is the correct way to fix it!

Justin

---

RE: A/C resistor for dash AC on P2000i - jdkskyking - 07-15-2025

Update:

I’ve finished the majority of the rewire upgrade. 
Installed busbars and fuse blocks for the different feeds to the AC components. 

           

I added two fuse blocks. Inside the glove box was the best location due to space and limited access.
       
The main CB is 40 amps for the entire system. I was not comfortable with that design. Now component will have a sub fuse. 

2003 vintage wiring harnesses on the FORD dash controllers. 
   

---

RE: A/C resistor for dash AC on P2000i - arcticdude - 07-15-2025

You’re doing some pretty work!

---