You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Air dump destroys bottom leveling rod mount. - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Suspension/Tires/Wheels (https://newellgurus.com/forumdisplay.php?fid=5)
+--- Thread: Air dump destroys bottom leveling rod mount. (/showthread.php?tid=8313)

Pages: 1 2


RE: Air dump destroys bottom leveling rod mount. - Gem930 - 12-31-2024

Yes bags were replaced before I got it.


RE: Air dump destroys bottom leveling rod mount. - cwl1979 - 12-31-2024

Do you know what bags it has on it currently? The internal rubber stop in the bags might be smaller causing the issue.


RE: Air dump destroys bottom leveling rod mount. - Gem930 - 12-31-2024

The part number for the airbags is : Goodyear 1R11.066.


RE: Air dump destroys bottom leveling rod mount. - cwl1979 - 12-31-2024

The internal rubber bump stop is almost 1 inch shorter in the goodyear bag. That would allow the coach to drop lower and crush your rubber. How long does it take to lose enough air for it to do this? Overnight? Couple week?


RE: Air dump destroys bottom leveling rod mount. - Gem930 - 12-31-2024

It would lose all its air in a day and a half without the compressor on if left in travel mode. In manual level or auto level it will last several days without the compressor running.

I just looked and I was wrong about stops on the leveling valves. As another post stated the leveling rods are moving up until they contact the top of the fender skirt. I could probably get .75 to 1 inch if I cut off the top of the leveling rod that sticks up but would have to rely only on the bottom hose clamp to secure it. I will look under it again to see if there is a good place to install a couple bump stops.